- Out-of-Stock

Banner
Filament Fiberlogy HIPS Black / Czarny 1,75 1.75 mm
Polityka bezpieczeństwa (edytuj za pomocą modułu „Bezpieczeństwo klienta”)
Zasady dostawy (edytuj za pomocą modułu „Bezpieczeństwo klienta”)
Zasady zwrotu (edytuj za pomocą modułu „Bezpieczeństwo klienta”)
1 roll of Filament Fiberlogy HIPS 1.75 1.75 mm
Color: Black / Black
HIPS can be used as a basic printing material or as a support for other types of filaments. The accuracy and lower weight of the print allow it to be used in modeling, making miniatures and costume parts. The ability to dissolve this fi lament allows it to be used as a support material for very complex prints and to rinse it from the actual printout.
Net weight: 0.85 kg
Printing temperature: 235 ° C - 250 ° C
Bed temperature: 80 ° C - 100 ° C (when using washers or other agents increasing the adhesion, the heating of the bed is not required)
Chamber temperature: recommended 80 ° C
Diameter tolerance: +/- 0.02mm
Oval tolerance: +0.01 mm
HIPS can be used as basic material for printing or as a support for other types of fi laments. Accuracy and lighter weight of printing enable to use it in modeling, creating miniatures and parts of costumes. The possibility of dissolving of this fi lament allows it to be used as support material for highly complex printing and subsequent rinsing it out from proper printing.
Net weight: 0.85 kg
Printing temperature: 235 ° C - 250 ° C
Bed temperature: 80 ° C - 100 ° C (when using plates or other means to increase the adhesion, the heating of the bed is not required)
Chamber temperature: 80 ° C suggested
Diameter tolerance: +/- 0.02 mm
Oval tolerance: +0.01 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy Filament IMPACT PLA Vertigo 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Filament Fiberlogy IMPACT PLA Black / Czarny 1,75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Filament Fiberlogy ASA Natural 1,75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy PET-G Tr. Orange / Tr. Orange 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy ABS PLUS Yellow / Yellow filament 1.75 1.75 mm
Reference: reg-x
Brand: Fiberlogy
Fiberlogy Easy PLA Purple / Violet filament 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy ABS PLUS Black / Black filament 1.75 1.75 mm
Reference: reg-x
Brand: Fiberlogy
Fiberlogy Easy PLA Filament 2.5 kg White / White 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy Easy PET-G Red / Red filament 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Filament Fiberlogy Easy PET-G Black / Czarny 1,75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy HD PLA Green / Green filament 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy Nylon PA12 Red / Red filament 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy ABS PLUS Black / Black filament 1.75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Filament Fiberlogy FiberSilk Metallic Perłowy / Pearl 1,75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Filament Fiberlogy Refill EASY PLA Gray / Szary 1,75 1.75 mm
Reference: reg. góra.
Brand: Fiberlogy
Fiberlogy ABS Gray / Gray filament 1.75 1.75 mm
Filament Fiberlogy HIPS Black / Czarny 1,75 1.75 mm